Alloy Wire Australia

Australian Contact Information

Care of Metal Spray Supplies Australia
P.O. Box 954, Capalaba ,
Queensland 4157 Australia

Tel: 0061 7 3823 1004
Fax: 0061 7 3823 1005
E-Mail: kevinhealey@alloywire.com

Nickel® 212
Nickel alloy products page

Products Page

Request a Quote

Request a Quote

Download TDS

Download Datasheet

Nickel® 212

Available in any of the 'profile options'

Nickel strengthened with an addition of Manganese.

Chemical Composition Specifications Designations Key Features Typical Applications
Element Min % Max %
Ni + Co 97.0
Mn 1.50 2.50
Fe 0.25
C 0.10
Cu 0.20
Si 0.20
Mg 0.20
S 0.006
W.NR 2.4110
AWS 073
UNS N02212
Stronger than Nickel 200 due to the addition of manganese. Electrical Lead Wires.
Supporting components in Lamps and electronic valves.
Electrodes in Glow-discharge Lamps.
Sparking Contacts.
Density 8.86 g/cm³ 0.320 lb/in³
Melting Point 1446°C 2635°F
Coefficient of Expansion 12.9 μm/m °C (20 – 100°C) 7.2 x 10-6 in/in °F (70 – 212°F)
Modulus of Rigidity 78 kN/mm² 11313 ksi
Modulus of Elasticity 196 kN/mm² 28400 ksi
Electrical Resistivity
10.9 μΩ • cm 66 ohm • circ mil/ft
Thermal Conductivity
44 W/m • °C 305 btu • in/ft2 • h • °F
Properties
Condition Approx. tensile strength Approx. operating temperature
N/mm² ksi
Annealed 450 – 550 65 – 80 Tensile strength and elongation drop significantly at temperatures above
315°C (600°F). Service temperature is dependent on environment, load and size range.
Hard Drawn 750 – 950 109 – 138

The above tensile strength ranges are typical. If you require different please ask.

*Trade name of Special Metals Group of Companies

Alloy Wire
Contact us for more information

Call Alloy Wire

0061 7 3823 1004