New Alloy: Inconel® 617 is now available from Alloy Wire. Learn about Inconel® 617
Datasheet: Stainless Steel 316LVM
Regarded as ‘Medical Grade’, Stainless Steel 316LVM is vacuum melted to achieve the extremely high levels of purity and ‘cleanliness’ required for surgical implants. It has excellent resistance in physiological environments, to general and intergranular corrosion, to pitting and crevice corrosion. These characteristics make it ideal for both medical application and high precision electronics.
Stainless Steel 316LVM is also known as AISI 316LVM.
Available in all profile options
Stainless Steel 316LVM offers the following key features:
Regarded as ‘Medical Grade’ stainless steel Vacuum melted to achieve the extremely high levels of purity and ‘cleanliness’ required for surgical implants.
Good mechanical properties and corrosion resistance.
Better pitting and crevice corrosion resistance than 302 & 304 stainless.
Stainless Steel 316LVM is known to be suitable for the following applications:
W.NR 1.4441
UNS S31673
AWS 163
ASTM F138
BS 7252 Pt1 COMPOSITION D
ISO 5832 – 1
The chemical composition of Stainless Steel 316LVM is indicated in the table below:
Element | Min % | Max % |
---|---|---|
C | – | 0.03 |
Si | – | 1.00 |
Mn | – | 2.00 |
P | – | 0.025 |
S | – | 0.01 |
N | – | 0.10 |
Cr | 17.00 | 19.00 |
Mo | 2.25 | 3.50 |
Ni | 13.00 | 15.00 |
Cu | – | 0.50 |
Fe | bal |
Stainless Steel 316LVM density, melting point, coefficient of expansion, modulus of rigidity, and elasticity is indicated in the table below:
Density | Melting Point | Coefficient of Expansion | Modulus of Rigidity | Modulus of Elasticity |
---|---|---|---|---|
8.0 g/cm³ | 1500 °C | 16.5 μm/m °C (20 – 100 °C) | 70.3 kN/mm² | 187.5 kN/mm² |
0.289 lb/in³ | 2730 °F | 9.2 x 10-6 in/in °F (70 – 212 °F) | 10196 ksi | 27195 ksi |
The typical heat treatment of Stainless Steel 316LVM:
Condition as supplied by AWI | Type | Temperature | Time | Cooling |
---|---|---|---|---|
Annealed or Spring Temper | Stress Relieve | 250 °C (480 °F) | 1 Hr | Air |
The typical mechanical properties of Stainless Steel 316LVM:
Annealed | ||
---|---|---|
Approx. tensile strength | <800 N/mm² | <116 ksi |
Approx. operating temperature | -200 to +300 °C | -330 to +570 °F |
Spring Temper | ||
---|---|---|
Approx. tensile strength | 1300 – 2200 N/mm² | 189 – 319 ksi |
Approx. operating temperature | -200 to +300 °C | -330 to +570 °F |
The above tensile strength ranges are typical. If you require different please ask.